• 设备
    • 今日
    • 0

    利用Keepalived+mysql构建高可用MySQL双主自动切转

    利用Keepalived+mysql构建高可用MySQL双主自动切转

        关于MySQL-HA,目前有多种解决方案,比如heartbeat、drbd、mmm、共享存储,但是它们各有优缺点。heartbeat、drbd配置较为复杂,需要自己写脚本才能实现MySQL自动切换,对于不会脚本语言的人来说,这无疑是一种脑裂问题;对于mmm,生产环境中很少有人用,且mmm管理端需要单独运行一台服务器上,要是想实现高可用,就得对mmm管理端做HA,这样无疑又增加了硬件开支;对于共享存储,个人觉得MySQL数据还是放在本地较为安全,存储设备毕竟存在单点隐患。
        使用MySQL双master+keepalived是一种非常好的解决方案,在MySQL-HA环境 中,MySQL互为主从关系,这样就保证了两台MySQL数据的一致性,然后用keepalived实现虚拟IP,通过keepalived自带的服务监 控功能来实现MySQL故障时自动切换。
        下面,我把即将上线的一个生产环境中的架构与大家分享一下,看一下这个架构中,MySQL-HA是如何实现的,环境拓扑如下:
        MySQL-VIP:192.168.1.98 
        MySQL-master1:219.137.37.186  
        MySQL-master2:192.168.1.102
         
        OS版本:CentOS 5.4  
        MySQL版本:5.0.89  
        Keepalived版本:1.1.20 
        一、MySQL master-master配置
    1、修改MySQL配置文件
    两台MySQL均如要开启binlog日志功能,开启方法:在MySQL配置文件[MySQLd]段中加上log-bin=MySQL-bin选项
    两台MySQL的server-ID不能一样,默认情况下两台MySQL的serverID都是1,需将其中一台修改为2即可
    Master1配置:
    #vim /etc/my.cnf


    log-bin=mysql-bin   //开启binlog日志功能
    general_log=ON
    general_log_file = /usr/local/mysql/logs/mysql.log
    server-id= 1  //
    binlog-do-db = 1000e56_test    //需要同步的库名称
    auto-increment-increment= 2
    auto-increment-offset= 2


    Master2配置:
    #vim /etc/my.cnf


    log-bin=mysql-bin    //开启binlog日志功能
    general_log=ON
    general_log_file = /usr/local/mysql/logs/mysql.log
    server-id= 2
    binlog-do-db = 1000e56_test
    auto-increment-increment= 2
    auto-increment-offset= 2


    2、将219.137.37.186设为192.168.1.102的主服务器
    在219.137.37.186上新建授权用户
        MySQL> grant replication slave on *.* to repl@'192.168.1.%' identified by '123456';       
        Query OK, 0 rows affected (0.00 sec)  
        MySQL> show master status;  
        +------------------+----------+--------------+------------------+  
        | File             | Position | Binlog_Do_DB | Binlog_Ignore_DB |  
        +------------------+----------+--------------+------------------+  
        | mysql-bin.000003 |      120 |              |                  |   
        +------------------+----------+--------------+------------------+  
        1 row in set (0.00 sec) 
    在192.168.1.102上将219.137.37.186设为自己的主服务器
        MySQL> change master to master_host='219.137.37.186',master_user='repl',master_password='123456',master_log_file='mysql-bin.000003',master_log_pos=120;  
        Query OK, 0 rows affected (0.05 sec)  
         
        MySQL> start slave;  
        Query OK, 0 rows affected (0.00 sec)  
         
        MySQL> show slave status\G  
        *************************** 1. row ***************************  
                     Slave_IO_State: Waiting for master to send event  
                        Master_Host: 219.137.37.186  
                        Master_User: replication  
                        Master_Port: 3306  
                      Connect_Retry: 60  
                    Master_Log_File: mysql-bin.000003  
                Read_Master_Log_Pos: 120  
                     Relay_Log_File: MySQL-master2-relay-bin.000002  
                      Relay_Log_Pos: 235  
              Relay_Master_Log_File: MySQL-bin.000003  
                   Slave_IO_Running: Yes  
                  Slave_SQL_Running: Yes  
                    Replicate_Do_DB:   
                Replicate_Ignore_DB:   
                 Replicate_Do_Table:   
             Replicate_Ignore_Table:   
            Replicate_Wild_Do_Table:   
        Replicate_Wild_Ignore_Table:   
                         Last_Errno: 0  
                         Last_Error:   
                       Skip_Counter: 0  
                Exec_Master_Log_Pos: 374  
                    Relay_Log_Space: 235  
                    Until_Condition: None  
                     Until_Log_File:   
                      Until_Log_Pos: 0  
                 Master_SSL_Allowed: No  
                 Master_SSL_CA_File:   
                 Master_SSL_CA_Path:   
                    Master_SSL_Cert:   
                  Master_SSL_Cipher:   
                     Master_SSL_Key:   
              Seconds_Behind_Master: 0  
        1 row in set (0.00 sec) 
    3、将192.168.1.102设为219.137.37.186的主服务器
    在192.168.1.102上新建授权用户
        MySQL> grant replication slave on *.* to repl@'192.168.1.%' identified by '123456';
        Query OK, 0 rows affected (0.00 sec)  
         
        MySQL> show master status;  
        +------------------+----------+--------------+------------------+  
        | File             | Position | Binlog_Do_DB | Binlog_Ignore_DB |  
        +------------------+----------+--------------+------------------+  
        | mysql-bin.000003 |      220 |              |                  |   
        +------------------+----------+--------------+------------------+  
        1 row in set (0.00 sec) 
    在219.137.37.186上,将192.168.1.102设为自己的主服务器
        MySQL> change master to master_host='192.168.1.102',master_user='repl',master_password='123456',master_log_file='mysql-bin.000003',master_log_pos=220;  
        Query OK, 0 rows affected (0.05 sec)  
         
        MySQL> start slave;  
        Query OK, 0 rows affected (0.00 sec)  
         
        MySQL> show slave status\G  
        *************************** 1. row ***************************  
                     Slave_IO_State: Waiting for master to send event  
                        Master_Host: 192.168.1.102  
                        Master_User: replication  
                        Master_Port: 3306  
                      Connect_Retry: 60  
                    Master_Log_File: mysql-bin.000003  
                Read_Master_Log_Pos: 374  
                     Relay_Log_File: MySQL-master1-relay-bin.000002  
                      Relay_Log_Pos: 235  
              Relay_Master_Log_File: MySQL-bin.000003  
                   Slave_IO_Running: Yes  
                  Slave_SQL_Running: Yes  
                    Replicate_Do_DB:   
                Replicate_Ignore_DB:   
                 Replicate_Do_Table:   
             Replicate_Ignore_Table:   
            Replicate_Wild_Do_Table:   
        Replicate_Wild_Ignore_Table:   
                         Last_Errno: 0  
                         Last_Error:   
                       Skip_Counter: 0  
                Exec_Master_Log_Pos: 374  
                    Relay_Log_Space: 235  
                    Until_Condition: None  
                     Until_Log_File:   
                      Until_Log_Pos: 0  
                 Master_SSL_Allowed: No 
                 Master_SSL_CA_File:   
                 Master_SSL_CA_Path:   
                    Master_SSL_Cert:   
                  Master_SSL_Cipher:   
                     Master_SSL_Key:   
              Seconds_Behind_Master: 0  
        1 row in set (0.00 sec) 
    4、MySQL同步测试
    如上述均正确配置,现在任何一台MySQL上更新数据都会同步到另一台MySQL,MySQL同步在此不再演示
    二、keepalived安装及配置
    1、219.137.37.186服务器上keepalived安装及配置
    安装keepalived
    cd /usr/local/src
    #wget http://www.keepalived.org/software/keepalived-1.2.2.tar.gz
    #tar xvzf keepalived-1.2.2.tar.gz
    #cd keepalived-1.2.2
    #./configure  
    #make && make install
    #cp /usr/local/etc/rc.d/init.d/keepalived /etc/init.d/
    cp /usr/local/etc/sysconfig/keepalived /etc/sysconfig/
    chmod +x /etc/init.d/keepalived
    chkconfig --add keepalived
    chkconfig keepalived on
    mkdir /etc/keepalived
    ln -s /usr/local/sbin/keepalived /usr/sbin/keepalived
    配置keepalived
    我们自己在新建一个配置文件,默认情况下keepalived启动时会去/etc/keepalived目录下找配置文件
    #vi /etc/keepalived/keepalived.conf  
    global_defs {
       notification_email {
            rjzhang@1000e56.com
       }
       notification_email_from rjzhang@1000e56.com
       smtp_server smtp.exmail.qq.com
       smtp_connect_timeout 30
       router_id MySQL-ha
    }
     
    vrrp_instance VI_1 {  
         state BACKUP   #两台配置此处均是BACKUP  
         interface eth0  
         virtual_router_id 51  
         priority 100   #优先级,另一台改为100  
         advert_int 1  
         nopreempt  #不抢占,只在优先级高的机器上设置即可,优先级低的机器不设置  
         authentication {  
             auth_type PASS  
             auth_pass 1111  
         }  
         virtual_ipaddress {  
             192.168.1.98  
         }  
    }  
     
    virtual_server 192.168.1.98 3306 {  
         delay_loop 2   #每个2秒检查一次real_server状态  
         lb_algo wrr   #LVS算法  
         lb_kind DR    #LVS模式  
         persistence_timeout 60   #会话保持时间  
         protocol TCP  
         real_server 219.137.37.186 3306 {  
             weight 3  
             notify_down /etc/keepalived/checkmysql.sh  #检测到服务down后执行的脚本  
             TCP_CHECK {  
                 connect_timeout 10    #连接超时时间  
                 nb_get_retry 3       #重连次数  
                 delay_before_retry 3   #重连间隔时间  
                 connect_port 3306   #健康检查端口
             }
         }  

    编写检测服务down后所要执行的脚本
        #vi /etc/keepalived/checkmysql.sh
        #!/bin/sh  
        pkill keepalived  
        #chmod +x /etc/keepalived/checkmysql.sh 
    注:此脚本是上面配置文件notify_down选项所用到的,keepalived使用notify_down选项来检查real_server 的服务状态,当发现real_server服务故障时,便触发此脚本;我们可以看到,脚本就一个命令,通过pkill keepalived强制杀死keepalived进程,从而实现了MySQL故障自动转移。另外,我们不用担心两个MySQL会同时提供数据更新操作, 因为每台MySQL上的keepalived的配置里面只有本机MySQL的IP+VIP,而不是两台MySQL的IP+VIP
    启动keepalived
        # /usr/sbin/keepalived -D  
        #ps -aux | grep keepalived 
    测试
    找一台局域网PC,然后去ping  MySQL的VIP,这时候MySQL的VIP是可以ping的通的
    停止MySQL服务,看keepalived健康检查程序是否会触发我们编写的脚本
    2、192.168.1.102上keepalived安装及配置
    安装keepalived,安装方法参照219.137.37.186的安装方法
    配置keepalived
    这台配置和上面基本一样,但有三个地方不同:优先级为80、无抢占设置、real_server为本机IP
    #vi /etc/keepalived/keepalived.conf
    global_defs {  
         notification_email {  
             haohailuo@163.com  
         }  
         notification_email_from haohailuo@163.com  
         smtp_server 127.0.0.1  
         smtp_connect_timeout 30  
         router_id MySQL-ha  
    }  
     
    vrrp_instance VI_1 {  
         state BACKUP  
         interface eth0  
         virtual_router_id 51  
         priority 80  
         advert_int 1  
         authentication {  
             auth_type PASS  
             auth_pass 1111  
         }  
         virtual_ipaddress {  
             192.168.1.98  
         }  
    }  
     
    virtual_server 192.168.1.98 3306 {  
         delay_loop 2  
         lb_algo wrr  
         lb_kind DR  
         persistence_timeout 60  
         protocol TCP  
         real_server 192.168.1.102 3306 {  
             weight 3  
             notify_down /etc/keepalived/checkmysql.sh  
             TCP_CHECK {  
                 connect_timeout 10  
                 nb_get_retry 3  
                 delay_before_retry 3  
                 connect_port 3306  
             }
         }
    }
    编写检测服务down后所要执行的脚本
        #vi /etc/keepalived/checkmysql.sh
        #!/bin/sh  
        pkill keepalived  
        #chmod +x /etc/keepalived/checkmysql.sh
    启动keepalived
    # /usr/sbin/keepalived -D  
    #ps -aux | grep keepalived
    测试
    停止MySQL服务,看keepalived健康检查程序是否会触发我们编写的脚本
    三、测试
    MySQL远程登录测试
    我们找一台安装有MySQL客户端的windows,然后登录VIP,看是否能登录,在登录之两台MySQL服务器都要授权允许从远程登录
        MySQL> grant all privileges on *.* to 'root'@'%' identified by '1000e56';  
        Query OK, 0 rows affected (0.00 sec)  
         
        MySQL> flush privileges;  
        Query OK, 0 rows affected (0.00 sec) 
    使用客户端登录VIP测试
        C:\MySQL\bin>mysql -uroot -p1000e56 -h192.168.1.98 -P3306  
        Welcome to the MySQL monitor.  Commands end with ; or \g.  
        Your MySQL connection id is 224  
        Server version: 5.0.89-log Source distribution  
         
        Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.  
         
        MySQL> 
    keepalived故障转移测试
    ※在windows客户端一直去ping  VIP,然后关闭219.137.37.186上的keepalived,正常情况下VIP就会切换到192.168.1.102上面去
    ※开启219.137.37.186上的keepalived,关闭192.168.1.102上的keepalived,看是否能自动切换,正常情况下VIP又会属于219.137.37.186
    注:keepalived切换速度还是非常块的,整个切换过程只需1-3秒
    ● MySQL故障转移测试
    ※在219.137.37.186上关闭MySQL服务,看VIP是否会切换到192.168.1.102上
    ※开启219.137.37.186上的MySQL和keepalived,然后关闭192.168.1.102上的MySQL,看VIP是否会切换到219.137.37.186上
    下面是用windows客户端连接的MySQL的VIP,在切换时我执行了一个MySQL查询命令,从执行show databases到显示出结果时间为3-5秒(大家可以看到上面有个错误提示,不过不用担心,因为我们的keepalived切换大概为3秒左右,这3 秒左右VIP是谁都不属于的)
        MySQL> show databases;  
        ERROR 2006 (HY000): MySQL server has gone away  
        No connection. Trying to reconnect...  
        Connection id:    592  
        Current database: *** NONE ***  
         
        +--------------------+  
        | Database           |  
        +--------------------+  
        | information_schema |  
        | MySQL              |  
        | test               |  
        +--------------------+  
        3 rows in set (9.01 sec) 
    后话:世间万事万物,都不具备绝对的完美,就像上面的MySQL-HA一样,keepalived只能做到对3306的健康检查,但是做不到比如像 MySQL复制中的slave-SQL、slave-IO进程的检查。所以要想做到一些细致的健康检查,还得需要借助额外的监控工具,比如nagios, 然后用nagios实现短信、邮件报警,从而能够有效地解决问题。




    问题1:启动slave出错(hostname.err): Slave failed to initialize relay log info structure from the repository, Error_code: 1872
    解决方案:
    service mysqld stop
    在mysql日志目录下删除所有的relay logs,包括hostname-relay-bin.XXX, hostname-relay-bin.index and relay-log.info等等




    问题2: 103MYSQL 启动slave出错: slave I/O: error connecting to master 1045
    解决办法:show grants for 'repl'@'192.168.1.%';
    change master to master_host='192.168.1.102', master_user='repl', master_password='123456',master_log_file='mysql-bin.000048',master_log_pos=422326;







    来自:PC 广东省
    上一篇: yqy部署关键信息(186)
    您可能还喜欢这些:

    亲,沙发正空着,还不快来抢?

    评论审核已开启:即评论经审核才能正常显示! 记住我的个人信息 回复后邮件通知我